products
Fiber Glass Pre-Die Cut Insulation Parts
RP Industries manufacture high quality range of Fiber Glass Pre-Die Cut Insulation Parts / Pads for Automobile, Power & Gas Industry.
This range is manufactured with or without Double side tape:
- E-Glass Fiber Products (Working Temp. 600 °C)
- ECR-Glass Fiber Products (Working Temp.800°)
- High Silica Fiber Products (Working Temp. 1000°C)
Preformed Moulded Insulation Products
RP Industries Preformed Insulation Products for Automotive Industry are manufactured with custom size and design with hybrid inorganic binder to performed into rigid sections with the product range as per customer requirement.
Key Properties:
- Made by Different Types of Fiber as per working temperature required.
- E-Glass Fiber (Working Temp. 650 °C)
- ECR-Glass Fiber (Working Temp. 850 °C)
- High Silica Fiber (Working Temp. 1000 °C)
- Excellent for thermal, acoustic and fire insulation Higher electrical properties Excellent sound absorption.
- High performance Automotive (cars / bikes / scooters/ Bus/Truck / marine)/Mechanical systems use thermal insulation as a means to increase engine performance.
- Improves the level of environmental sound.
- Used on both hot and cold property to conserve energy
Fiber Glass Preformed Tubes / Pipe
RP Industries’ Fiber Glass Preformed Tubes / Pipe are manufactured out of E-Glass Fiber, ECR Glass Fiber , High Silica fibre, bonded with inorganic hybrid binder and performed into rigid sections with the product range to fit for pipes of ¼” to 40” (included) nominal bore and from 25mm to 100mm insulation thicknesses. They can be either un-faced or aluminium foil faced.
Made by Different Types of Fiber as per working temperature required.
- E-Glass Fiber (Working Temp. 650 °C)
- ECR-Glass Fiber (Working Temp.850°C)
- High Silica Fiber (Working Temp. 1000°C)
Applications:
- Muffler and exhaust insulation
- Power generating equipment
- Automotive
- Marine, industrial, and processing
Fiber Glass Heat Shield
We are offering laminated Heat Shield of E-fibre glass fabrics with thermal resistance up-to 1000°C.
This fabric can be processed with variety of resins depending on end use requirements.
Laminated with metallized Polyester foil or Aluminium foil. One sided or double sided laminated in combination with high temperature; self-adhesive.
Applications:
- Tube, wire and cable insulation
- Insulation for the automotive industry
- Electrical, Acoustic and Thermal insulation
- Reinforcement material in Automotive
- Shipbuilding and Construction Industries
- Plastic Reinforcement
- Aerospace Industries
- Motor Sports
Thermal Insulation pad
Internal Combustion engines produce a lot of heat during their combustion cycle. This can have a negative effect when it reaches various heat-sensitive components such as sensors, batteries and starter motors. As a result, thermal insulation is necessary to prevent the heat from the exhaust reaching these components.
Made by Different Types of Fiber as per working temperature required.
Applications:
- Muffler and exhaust insulation
- Power generating equipment
- Automotive
- Industrial furnaces and ovens
- Marine, industrial, and processing
Fibre Glass needle mat / felt
RP Industries E-Fiberglass Needled Mat / felt. E-Fiberglass mechanically bonded glass fibre insulation blanket of uniform density. It is manufactured from a well-controlled assortment of long textile glass fibers to ensure uniform mechanical bonding with no additional binders. The resulting product has excellent insulation efficiency for extended exposure at high temperatures. Also good for sound insulation and filtration applications.
Made by Different Types of Fiber as per working temperature required.
- E-Glass Fiber (Working Temp. 650°C)
- ECR-Glass Fiber (Working Temp. 850 °C)
- High Silica Fiber (Working Temp. 1000 °C)
Glass Fabric/ Fibre Glass cloth
We are manufacturing high quality range of Fibre Glass Fabric/Cloth. Our range is produced by different weaving such as plain, twill, and satin. This is widely used in thermal insulation fire retardant, sound insulation, heat preservation applications and sheet laminates. Our range can also be treated in different ways in order to meet specific purpose. Available in 100 gsm to 1000gsm, we can customize the size as per client requirement.
Made by Different Types of Fiber as per working temperature required.
- E-Glass Fiber (Working Temp. 650°C)
- High Silica Fiber (Working Temp. 1000 °C)
E-Glass Roving
Fiberglass roving after texturized, has good acoustic absorption, with different materials, the continuous fiberglass roving can operate from 650° C up to 800° C.
Texturized fiberglass roving can be directly injected into a muffler, plastic bag, and non-woven or winding around the perforated pipe and made into perform parts.
Applications:
- Muffler filling for power sport vehicles (motorcycles, snowmobile, and ATVs)
- Industrial silencers
- Acoustic and thermal insulation application
E-Glass Fiber Rope
We are manufacturing high quality range of Fiber Glass Rope. Our range is produced by different diameter , density and length. This is widely used in thermal insulation fire retardant, sound insulation, heat preservation applications. Our range can also be treated in different ways in order to meet specific purpose. we can customize the size as per client requirement.
